Duane C. Johnson
Red Rock Energy
12181 375th St.
North Branch, MN
USA 55056-6799
I usually send the same or next day, (except for special models). Same thing for checks when you send me your address even before receiving the check, (usually).
led3
LED3 (My original tracker with 4 LED sensors)
 |
| LED3 |
$35us
No longer available |
LED3Kit Kit
Still available
Not recommended as it's very difficult to assemble.
And it doesn't have battery under-voltage protection. |
$20us |
LED3PCB PC Board
Still available |
$3us
I have hundreds of these |
led3x
LED3X (Replacement for the LED3)
 |
 |
| LED3XS24Vc3 rev. c3 10.5-44 volts |
$35us |
LED3XS24Vc3NP rev. c3 10.5-44 volts Specially modified to
eliminate the parking feature.
(This is essentially obsolete as one can use
the RM feature which can be made with NP for the same cost) |
$45us |
LED3XS24Vc3RI rev. c3 10.5-44 volts Specially modified to
prevent reversal movement for about 180 seconds |
$45us |
RI Reverse Inhibit daughter board
to be added to any LED3Xc3 series main board.
It can be added to a c1/c3 series board but it's a bit harder to do. |
$10us |
RS Remote Shut down feature
to be added to any LED3Xc3 series main board.
It can be added to a c1/c3 series board to disable tracking and head
toward the parking position. Generally used in thermostat applications. |
$10us |
RIPCB
Reverse Inhibit daughter board PC Board.
This board also has circuitry and connector location
for use with Normally Open, NO, low current
limit switches. |
$4us |
| LED3XS24Vc3Kit rev. c3 10.5-44 volts kit |
$20us |
| LED3XS48Vc3 rev. c1 10.5-88 volts |
$40us |
RS, Remote Shutdown feature, used with things such
as thermostats, manual parking, or severe weather parking.
This can be added to any of the LED3X series boards. |
$10us |
| LED3XSc3PCB rev. c3 PC Board |
$6us
I have about 1000 of these |
LEDSRM
Single axis remote sensor
Specify Parking or No-Parking |
$10us |
LEDSRMPCB
Single axis remote sensor PC Board |
$3us |
LEDDRM
Dual axis remote sensor
Specify Parking or No-Parking on each of the axes |
$20us |
LEDDRMPCB
Dual axis remote sensor PC Board. |
$6us |
LEDSRMP24Vc3PACK rev. c3 10.5-44 volts
Power unit with remote sensor connector |
$45us |
MODIFY-LED3XS24Vc3->LED3XS24Vc3RM
Pack of parts to modify a standard LED3XS24Vc3 to an LED3XS24Vc3RM |
$6us |
LEDDRMPP24Vc3PACK rev. c3 10.5-44 volts
Standard set of components for Dual axis with remote sensor
Parking on both of the axes |
$90us |
led4
LED4
 |
| LED4 |
$45us
No longer available |
led5
LED5 Single Axis Low Power Tracker
 |
|
| LED5S5V 5 volts |
$22us |
| LED5S12V 12 volts |
$22us |
LED5SPLC Special single axis sensor version to be used as an input
to PLC, Programable Logic Controllers, and similar circuits. |
$22us |
LED5S12VBoat 12 volts
With spare connector parts |
$23us |
| LED5SPCB PC Board |
$2us |
LED5 Dual Axis Low Power Tracker
|
|
| LED5D5V 5 volts |
$44us |
| LED5D12V 12 volts |
$44us |
LED5SPLC Special dual axis sensor version to be used as an input
to PLC, Programable Logic Controllers, and similar circuits. |
$44us |
| LED5DPCB PC Board |
$4us |
ledse
LEDSE Single Axis Ultra Low Power Tracker
 |
|
LEDSES
Note! These need to be specifically configured
for the motor type used. |
$33us |
| LEDSESPCB PC Board |
$4us |
LEDSE Dual Axis Ultra Low Power Tracker
|
|
LEDSED
Note! These need to be specifically configured
for the motor type used. |
$66us |
| LEDSEDPCB PC Boards |
$8us |
led6
LED6 Ultra Small Single Axis Tracker
based on an IR2184 power MOSFET driver
integrated circuit.
 |
|
| LED6S12V 12 volts |
$25us |
| LED6S12VKit 12 volts kit |
$17us |
| LED6SPCB PC Board |
$6us |
